 |
| Material: | |
|---|---|
| Quantity: | |
| PDF Export | |
YX-1020
Steelmama
MAMA-1020
5.5KW+3KW
8-12m/min
20mX5mX3m
2
YX-1020mm Roofing Sheet Panel Roll Forming Machine With Hydraulic Cutting
1. What is roofing sheet machine?
This is Metal roofing sheet roll forming machine iron roofing sheet making machine , the finished sheet usually worked for roof and wall panel . It has beautiful water wave design , now is widely used in all over the world.
2. Parameters:
| Suitable Material | HRB60 or equivalent(PPGI/PPGL/GI/GL) |
| Materials thickness | 0.3mm-0.8mm |
| Dimension | About 8.5*1.3*1.1m(L*W*H) , as per the drawing |
Length of the Sheet | can set the length according to your infact need. It is controlled by PLC which can ensure the accuracy of ±1mm. |
| Cutting | Automatically stop and cutting when it comes to the set length. |
B.Components Details
| Roller Material | High grade 45# steel. Hard chrome plating, 0.05mm. |
| Main Frame | 350# steel. More stable and no shaking. |
| Middle Plate | 20mm. We use thicker plates to ensure stability of our products. |
| Forming Steps | 19 steps, according to the drawing. |
| Shaft Material | Φ70 mm, high grade 45# steel. Treating process: tempering- finish turning, high rigidity, hard to deform. |
Cutting Blade Material | Cr12, hardness HRC60-62. Treating process: heat treatment- plane abrasion- wire electrode cutting. |
C.Electric Components
| Suitable Power | 380V, 50 Hz, 3 phase or according to your need. |
| Screen | 7 inch touch screen, easy to operate.Brand Delta or based on your need |
| PLC | Delta Brand (Or Panasonic /Siemens ) Well-adapted to various conditions, such as moisture, electromagnetic disturbance. |
| Frequency Converter | Sanjing ; It has the advantage of slowing down before cutting, to ensure the length accuracy (±1mm, far better than industrial standard ±3mm). |
Length Measurement Device | Omron, made in Japan. It features with high accuracy and stability. |
3. Machine Details:
1) Decoiler:
Usage: It is used to support the steel coil and uncoil it in a turnable way.
Passive uncoil pulled by roll forming system
Loading capacity:5T Uncoiling width:1250mm Inner diameter: 450-550mm
2) Forming Rollers:
4. Our service:
1. we can send our engineer to your site and do the training for your men. you just only bear the cost for our engineer's air ticket, visa, accommodations, food and transportation in your country.
2. You can send your men to our factory. we will teach them how to operate the machine without training charges.
3. Actually, there's another cheap and easy way to choose. Every machine leaves our factory with one book of operation manual. You can read through the manual first, and get familiar with the machine. Then we can get a video call, and teach you on-line on how to operate the machine.
4. Apart from the above training course, we also provide 2 years warranty for all the easily broken part of the machine for free and whole-life technical service support.
5. FAQ:
1. Does one machine can only produce one style panel profile?
Not exactly.For wider and double layer making machine. It can produce more than 6 kinds of panels.
2. Do you have after sales support?
Yes, we are happy to give advice and we also have skilled technicians available across the world.We need your machines running in order to keep your business running.
3. How to visit your company?
a.Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi (1 hour), then we can pick up you.
b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.
4. What can you do if the machine broken?
Our machine's warranty period is 12months,if the broken parts can't repair,we can send the new parts replace the broken parts freell,but you need pay the express cost yourself.if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.
5. Can you be responsible for transport?
Yes,please tell me the destination port or address.we have rich experience in transport.
YX-1020mm Roofing Sheet Panel Roll Forming Machine With Hydraulic Cutting
1. What is roofing sheet machine?
This is Metal roofing sheet roll forming machine iron roofing sheet making machine , the finished sheet usually worked for roof and wall panel . It has beautiful water wave design , now is widely used in all over the world.
2. Parameters:
| Suitable Material | HRB60 or equivalent(PPGI/PPGL/GI/GL) |
| Materials thickness | 0.3mm-0.8mm |
| Dimension | About 8.5*1.3*1.1m(L*W*H) , as per the drawing |
Length of the Sheet | can set the length according to your infact need. It is controlled by PLC which can ensure the accuracy of ±1mm. |
| Cutting | Automatically stop and cutting when it comes to the set length. |
B.Components Details
| Roller Material | High grade 45# steel. Hard chrome plating, 0.05mm. |
| Main Frame | 350# steel. More stable and no shaking. |
| Middle Plate | 20mm. We use thicker plates to ensure stability of our products. |
| Forming Steps | 19 steps, according to the drawing. |
| Shaft Material | Φ70 mm, high grade 45# steel. Treating process: tempering- finish turning, high rigidity, hard to deform. |
Cutting Blade Material | Cr12, hardness HRC60-62. Treating process: heat treatment- plane abrasion- wire electrode cutting. |
C.Electric Components
| Suitable Power | 380V, 50 Hz, 3 phase or according to your need. |
| Screen | 7 inch touch screen, easy to operate.Brand Delta or based on your need |
| PLC | Delta Brand (Or Panasonic /Siemens ) Well-adapted to various conditions, such as moisture, electromagnetic disturbance. |
| Frequency Converter | Sanjing ; It has the advantage of slowing down before cutting, to ensure the length accuracy (±1mm, far better than industrial standard ±3mm). |
Length Measurement Device | Omron, made in Japan. It features with high accuracy and stability. |
3. Machine Details:
1) Decoiler:
Usage: It is used to support the steel coil and uncoil it in a turnable way.
Passive uncoil pulled by roll forming system
Loading capacity:5T Uncoiling width:1250mm Inner diameter: 450-550mm
2) Forming Rollers:
4. Our service:
1. we can send our engineer to your site and do the training for your men. you just only bear the cost for our engineer's air ticket, visa, accommodations, food and transportation in your country.
2. You can send your men to our factory. we will teach them how to operate the machine without training charges.
3. Actually, there's another cheap and easy way to choose. Every machine leaves our factory with one book of operation manual. You can read through the manual first, and get familiar with the machine. Then we can get a video call, and teach you on-line on how to operate the machine.
4. Apart from the above training course, we also provide 2 years warranty for all the easily broken part of the machine for free and whole-life technical service support.
5. FAQ:
1. Does one machine can only produce one style panel profile?
Not exactly.For wider and double layer making machine. It can produce more than 6 kinds of panels.
2. Do you have after sales support?
Yes, we are happy to give advice and we also have skilled technicians available across the world.We need your machines running in order to keep your business running.
3. How to visit your company?
a.Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi (1 hour), then we can pick up you.
b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.
4. What can you do if the machine broken?
Our machine's warranty period is 12months,if the broken parts can't repair,we can send the new parts replace the broken parts freell,but you need pay the express cost yourself.if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.
5. Can you be responsible for transport?
Yes,please tell me the destination port or address.we have rich experience in transport.
