20mm Thickness Panel Double Layer Roof Sheet Roll Forming Machine Save Money and Space
Product Description
20mm Thickness Panel Double Layer Roof Sheet Roll Forming Machine Save Money and Space
1. Roof Sheet Machine Manufacturer:
As a professional manufacturer,we can make Double layer Galvanized Corrugated Metal Roofing Sheets Forming Machine by customer`s demand, with a profile drawing and thickness, we can design the machine quickly.Until now,we can do many kinds of roof panel machine,such as trapezoidal sheet making machine, corrugated sheet making machine, glazed tile making machine, Double Layer Roll Forming Machine and so on.
2. Parameters:
No. | Item. | Parameter. |
1 | Can Formed Material | PPGI,GI,AI |
2 | Equipment operation | Automatic |
3 | Voltage | 380V 50Hz 3Phase or as your requirement |
4 | Thickness of sheet (mm) | 0.3-0.8mm |
5 | Material width(mm) | As your requirement |
6 | Cover Width of the sheet after formed | as your profile drawing |
7 | The size of the roll forming machine | 6.8mx1.5mx1.4m |
8 | Speed | 8-12m/min |
9 | Diameter of shaft | 75mm |
10 | Weight of the Machine | About 6.5T |
11 | Material of rollers | C45 steel quenched and chromed |
12 | Motor brand | As your requests |
13 | PLC | Siemens or Delta or Mitsubushi |
14 | Total power (kw) | 6kw |
15 | Power of hydraulic system | 3kw |
16 | Power of main molding core | 3kw |
Main machine:
Material of rollers: 45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.
Hydraulic system
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
3. Processing flow diagram of our roof roll forming machine
Manual decoiler→→ Feeding material into machine →Roll forming machine →Measure length→Hydraulic cutting →Finished Products
4. COMPONENT:
Name. | Quantity. | Units. | |
5T Manual Decoiler | 1 | Set | |
Main Machine | Feeding device | 1 | Set |
Roll forming system | 1 | Set | |
Cut Equipment | 1 | Set | |
Hydraulic system | 1 | Set | |
Electric control system | 1 | Set | |
Run out table | 1 | Set | |
5. Packing:
1. one 40ft container for loading one set machine with manual decoiler;
2. the whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3. Spare parts and some small parts packed in plastic tooling box;
4. All Components Fixed by steel wire with Container.
Remarks
Payment terms | 30% T/T in advance and balance 70% after inspection confirmation before shipment. |
Delivery | within 30 working days after receipt of deposit. |
Packing | Nude packing with 1*40GPcontainer |
Warranty | One year, and we will provide the technical support for the whole life. |
Installation | 1.Training: the buyer should charge of visa, return ticket, food and accommodation overseas and pay salary everyday. 2. Need one technician 3. Training time: one week (contains the time of installation and adjustment) |
5. FAQ: